#38 Focusrite Scarlett 18i8 (1st gen) teardown

Yet another "sold as faulty" eBay catch - a nice little(?) Focusrite Scarlett 18i8 USB audio interface. Which turned out to actually have nothing at all wrong with it.

Admittedly, i went against the first commandment of teardowns (ie. "Don't turn it on; take it apaaaah't!.."), but only because it was the first troubleshooting step, and it used the same drivers as my Scarlett 18i6 "daily driver".

#37 Presonus Audiobox 1818VSL teardown and troubleshooting (part 1)

Together with the pair of Konnekt x32's (one of which is dealt with in the previous write-up here), i also got one of these Presonus Audiobox 1818VSL's. Also sold as untested, but powered up and allegedly detected by a Mac, so i figured it couldn't have been too far gone (or fubar'd).

The reality of it turned out to be a wee bit more complicated than one might've hoped...

#36 TC Electronic Digital Konnekt x32 teardown and repair

We're having a "productive" period, as it turns out. This time around a TC Electronic Digital Konnekt x32 audio interface / digital patchbay is on the chopping block. Or on the operating table, rather - i do indeed hope to repair, rather than dismember and mutilate this thing.

I managed to catch this, along with a twin of its, for under $200 / 200e delivered, as a "job lot", both sold as untested / faulty. The first one was shown powered up and possibly working fine (several LEDs on the front panel being lit), so potentially fine, pending tests. This second one though, not quite so much - only the blue LED halo surrounding the power button lit.

#35 Focusrite Saffire Pro 24 DSP teardown and repair

Yet another sold-as-faulty eBay catch - a nice little Focusrite Saffire Pro 24 DSP Firewire audio interface. The listing said:

"I bought this online and it is not working or it is not compatible with my computer. My computer is not recognising this audio interface. So I am selling it as not working."

 Fine by me. The photo of the back showed the Firewire port as looking quite pristine, so it wasn't a case of connector-inserted-upside-down. And for the price i won the auction for, it was worth the gamble. A frontal photo did show it powered up, so at the very least, it wasn't dead.

#34 MOTU Traveler mk3 teardown and repair

Hunting for faulty stuff on eBay has been fruitful yet again: this time, a MOTU Traveler mk3 Firewire audio interface. The reported issue was by now, the "classic", dead Firewire.

A pretty comprehensive little package, with loads of features shoehorned into quite a compact package - 1RU thickness / height, but only about 80% of the width.

#33 Superlux R102 active ribbon microphone teardown & reverse-engineering

By sheer luck / accident, the other week i refreshed my Facebook main page (or "news feed" or whatever), and the first thing i saw was an ad from one of the trading groups i'm in, about a Superlux R102 (mk1) ribbon mic for sale, for a measly 30e (~$32). The seller was in a (sort-of-nearby) town i was headed to just a few days later, so i jumped at the chance. Immaculate shape, fully functional, retails for about four times as much - why not?

#32 M-Audio (Avid) Fast Track C600 teardown & repair

This little bugger, an M-Audio / Avid Fast Track C600, was listed as faulty on eBay - description said it would no longer power up, regardless of it being bus-powered or having its own external power supply connected. Got it shipped for 30eu / $30, so why not?

#31 Warwick ProFET 5.1 bass amplifier teardown & maintenance

A local buddy just brought this German beastie in, citing a dicky DI output, and an unhealthy-sounding fan. Well, when i say "German", i mean the brand itself; as one might expect, it's "obviously" made in China, as it says on the back. But isn't nearly everything (else), anyway?

#30 Double Dock Day - HP HSTNN-I11X and Dell PR03X (USB 3.0) teardown

Right, so i had been on the lookout for a cheap docking station for my Dell Precision M4800 for a while, and the other week i stumbled across and ad on a local website about a clearance sale from a university - docking stations, laptop chargers, some desktops etc. When i finally got to their premises, instead of the $5-10 prices i expected, the guy there said i could have them for some coffee-change into the tip-jar, so i walked out with two PR03X's for a mere 40-50 cents or so - me happy!

The HP dock though, was about 15$, but came with a ma-HOO-sive 230W power brick, which is for another project; expect a teardown of the brick soon. Sadly the dock wouldn't fit my HP Elitebook 6930p (only the later xx40 Elitebooks), but that doesn't mean we can't take a peek under the skirts, and then resell it to make some of the money back, right?

#29 Tie-dyed acoustic panels

I know, it's a bit of an uncharacteristic topic for this (sort of a) blog, but despite the curve-ball thrown here, bear with me. It's for a good cause... As it were.

#28 Active full-range surround speaker project (BN96-12832 & TPA3118)

Since the "unofficial" theme of this blog seems to be repair, recycling and repurposing (more or less), i finally got around to getting knee-deep into this idea, which i started devising quite a while ago - a pair of "slimline" surround speakers.

Disclaimers:
 - No, these are not meant (or supposed) to be "hi-fi". More just for a bit of "ambient noise", if you will, for movies with 5.1 soundtracks. That, and possibly alternative monitoring for checking mixes.
 - No, these are not meant to go terribly loud. Due to, let's call them, physical constraints, they'll be placed at the corners of my sofa (right up against the wall, opposite the TV and the "mains"), so no huge SPL's are required.

#27 Samsung 5V 1A ETA0U81EBE USB travel charger

This one's a quickie, but i figured i might as well document it.

A friend passed me this a few weeks ago, not quite sure why. I don't recall it being mentioned as dead, only not-used. Either way, last night i wanted to charge the battery inside my modded M-Audio Fast Track, in preparation for a local gig next week. Upon plugging it into this thing, the power LED flashed up for an instant, then nothing. I figured it might not like the USB data lines being tied together, as they often are, in chargers; it powered on and worked well with another charger. But that prompted me to crack this one open.

#26 Cheap & easy DIY LED light panels

Recycling's all the rage nowadays, right? Right..? Well, either way, freebie raw materials for projects are always welcome, that's something i'm pretty sure we can all agree on. Now, i'm not admitting to be a hoarder, far from it, but i kinda-sorta couldn't bring myself to throw away the dead (read: cracked) laptop LCDs that i had replaced for various clients at work. And what with "finally" expanding this blog onto YouTube, i figured i'd need some extra lighting for the workbench. Catching my drift yet?

#25 Behringer ADA8000 "Ultragain Digital" revival

I got my hands on one of these Behringer Ultragain Pro-8 Digital a few months ago, as faulty (as in, totally dead) for about 50$ shipped. Having done some preemptive googling before going for it, i was expecting the transformer to be toasted. Sure enough, that's exactly what the problem was - one half of the center-tapped primary measured in the hundreds of kohm, so pretty much open-circuit (as opposed to the 50-odd ohms the remaining good half measured).

Initially i was planning on finding / getting a "drop-in replacement" toroidal transformer, ie. similarly sized physically and power-wise, but with less insanely-high secondary voltages. The stock one, according to some "inspection notes" i found online, seems to have had roughly 2x20VAC windings for the analog +/-15V (meaning the voltage regulators had to "burn off" uselessly much power / voltage), 12VAC for the 5V regulators, and a whopping 58VAC winding for the phantom power regulator. That's about a 50% overkill across the board. One can only wonder just what possessed them to spec the transformer quite like that, especially since it must've been a custom order - you'll rarely find retail units with more than two (identical) secondary windings, and when you do, expect to pay a pretty penny for'em.

#24 SM Pro Audio TB202 dual tube preamp / channel strip modding & upgrade, part 4

On the note of front panel switches, you might've noticed two extra ones, in the previous post (the part 3). One other idea had crossed my mind, already long before this second stage of modding. It took me a little while, but i managed to get my head around how to implement this. The idea was to be able to swap the order of the two processors in the signal path.

From the factory, as described in the "part one" post, the processing order is input - gain - tube - compressor - EQ - output. But in some cases, it can be desirable to have the EQ come before the compression stage. That way, one can attenuate certain frequency ranges that one would not want the compressor to react to (or conversely, boost ranges for the compressor to react to).