Search This Blog

Showing posts with label li-po. Show all posts
Showing posts with label li-po. Show all posts

Tuesday 14 September 2021

#78 Focusrite Saffire 6 USB 2.0 modding (adding a battery)

And here we are, on the third and final(?) part of the modding journey involving this little fella. As presented in the previous post, i managed to "persuade" the thing to power up fully despite not being attached to a computer, only to a USB-connected 5V source. But now, the time has come to integrate what is virtually a "power-bank", within the enclosure, and thus have the Saffire be entirely "self-sufficient", as it were.


Saturday 14 September 2019

#52 Solar A2.7 & Fishman Fluence Keith Merrow, part two

Aaaaand it's back! Not because of technical issues though. Due to chance, and the limited speed of international shipping, only the day after the owner got his guitar back, did the Fishman rechargeable battery-pack get delivered, just only too late to include it in the previous operation. But no matter, this should be far less involved than that.



Friday 6 September 2019

#48 JBL Charge 3 Bluetooth speaker teardown

This JBL Charge 3 came in last week in need of a micro-USB (charging) connector replacement. First thing i did was to look up how to take apart the thing, and the good people at iFixit had a comprehensible enough guide.


The connector board is totally separate from the mainboard, so the "repair" part was trivial, and done within minutes. But the more interesting stuff lies deeper inside. Sure, my photography may never get to be quite as pretty as iFixit's, but on the other hand, you're not here (just) for pretty pictures, are you? You're here to see what makes things tick. Or at least that's the curiosity that drives me to take apart stuff like this.

Thursday 25 April 2019

#40 Fake "Beats" Bluetooth speaker teardown & mod

I got this handed in by a local friend the other day. It was apparently bought in Singapore a good few years ago, hasn't been used in quite a while, and i guess(?) the charging cable (slightly less usual mini-USB) got misplaced or something.



Thursday 5 October 2017

#17 Takstar / Gear4Music WPM-200 Wireless Monitor System part 1: receiver teardown / li-po upgrade

This "part one" will be dealing only with the WPM-200 receivers and the lithium-upgrade pertaining to them. The transmitters and subsequent mods will be dealt with at a later date.

Fine, i'll admit, i miiiiiiiight be ever so slightly guilty of the whole "if all you have is a hammer, everything around you looks like a nail" thing, what with these nifty little one-cell charger & protection boards, but hey - at least it kinda validates(?) my "stockpiling" of laptop and phone batteries along the years. Now, i finally have the excuse to put some of them to good use and all that...

During my UK eBay browsing sessions a month or two (or seven?) back, i happened to come across a few listings of faulty wireless monitor sets (transmitter & bodypack-receiver) from this British music gear retailer. A bit of googling later, revealed to be straight rebadges of Takstar WPM-200 sets - nope, they hadn't even bothered changing the model number. The one thing they might've customized, though, are the radio frequency ranges / channels (since there are different regulations on different continents, and so on).



Tuesday 2 May 2017

#8 Low battery blinking indicator

This thought came out of the LED ring flash li-po mod, since the battery indication programmed into the microcontroller was "calibrated" for 100% being the 6v coming out of four full AA batteries, and (close to) 0% around 3.8-4v. Obviously, since a single lithium cell is only 4.2v when full, the stock battery indicator's out of whack.

Next step - i wanted a blinking indicator. Partially, because a solidly-lit LED would be a constant drain, and partially because a flashing light is more noticeable - think turn-signals on cars, or the emergency lights on police cars & ambulances.

Sunday 30 April 2017

#7 Cheapo ring LED flash / light teardown & li-po mod

I had been thinking about grabbing a LED ring flash for my camera for quite some time, but finally last week, i pulled the trigger on one. Cheapest of the cheap (from what i could find on the British eBay), but still cost me a bit under 30 bucks.


That being said, it's a reasonably well-featured package: four different coloured diffusers (that go onto the front of the LED ring), eight different size adapter rings (for lens/filter threads, and onto which the light clamps on to), and the control unit that mounts into the camera flash "hot-shoe". Also, the LEDs in the light "head" are split into two halves (ie. left and right), for <ahem> creative effect when using the ring flash for macro work.

The thing normally works on 4 AA's, buuuuuut... given some of the previous posts here, you oughtta have half an idea about my feelings regarding disposable power sources... <wink-wink, nudge-nudge>

Monday 24 April 2017

#5 Another Li-ion Upgrade - Cordless Trimmer


Due to my openly-admitted laziness, a while back i got myself a trimmer - it's way quicker and easier than a full shave, and i rarely need (or want, for that matter) to be totally clean shaven. But that's enough background babbling, on to the nitty-gritty. This one's mainly "what for increasing the chooch factor", as it were - thank you AvE, you crazy canuck.