#83 Focusrite Scarlett 18i8 gen2 teardown & repair

I know it's been quite a while, but i haven't given this up! Life just gets in the way, i'm sure you know how it is... Regardless, this time we'll be taking a dive into yet another "as faulty" acquisition - an utterly pristine-looking Focusrite Scarlett 18i8 gen2.

#79 Focusrite Saffire 6 USB 2.0 repair

 Ok, this is gonna be a bit of a quickie. Basically, i got this one ridiculously cheap as well, with the intention of repairing it and gifting it to the new singer in my significant other's band, in order to facilitate more productive creative work. Just like the first one i did a teardown on and then modded, this was sold as faulty, but with more... obvious issues, let's call them.

#78 Focusrite Saffire 6 USB 2.0 modding (adding a battery)

And here we are, on the third and final(?) part of the modding journey involving this little fella. As presented in the previous post, i managed to "persuade" the thing to power up fully despite not being attached to a computer, only to a USB-connected 5V source. But now, the time has come to integrate what is virtually a "power-bank", within the enclosure, and thus have the Saffire be entirely "self-sufficient", as it were.

#75 Focusrite Scarlett 2i4 (1st gen) teardown & repair

Perhaps a bit anachronistically, only *after* getting my hands on the previously-torn-down 2i4 gen2, i also came into the possession of a 2i4 gen1, that was no longer being detected completely / correctly by the computer. But hey, better late than never, right? I also grabbed a working one (because the price was near-irresistible), to have a known-good source for the firmware, in case that was the issue.

#74 Focusrite Saffire 6 USB 2.0 modding (for stand-alone operation)

First of all, the main issue with using this stand-alone (without a computer) is that the Xmos controller only enables the analog power supplies (the two MIC2505's and the LM3488) once it's done whatever handshaking it needs to, with the computer. But since i'd only need / want it to act as a rudimentary preamp / mixer / headphone amplifier, i kinda-sorta need the analog supplies working.

#73 Focusrite Saffire 6 USB 2.0 teardown

Initially, i was thinking of getting and modding a Scarlett 2i4 to use as an updated and more flexible in-ear headphone amp, to replace my aging modded M-Audio Fast Track (incidentally, the subject of the very first article on this blog). I even ended up with two 1st gen ones as well as two 2nd gen ones. But recently, i came across yet another deal i couldn't pass up - a Saffire 6 USB for a nearly ridiculous 36e, shipped(!). Virtually the same structure as the 2i4's, but i can definitely get more money (back) from reselling those, and keeping the Saffire. That, and i had come across instructions for a mod to the Saffire 6, to enable stand-alone operation.

#69 Focusrite Scarlett 2i4 (2nd gen) teardown & repair

For a little while now, i've been thinking of "upgrading" from my old-but-modded M-Audio Fast Track to use as an in-ear monitor amplifier, and the Scarlett 2i4 caught my eye. The mono/stereo direct-monitor selection, as well as the hardware-switchable pads on the inputs made up just the right feature set, in addition to it being usable as a mobile recording interface. As it happens, just the other week, mere days after having saved an eBay search for 2i4's, an email notification revealed a 2nd gen allegedly-faulty unit being up for sale from Italy. I quickly asked the seller about shipping costs, and ended up sealing the deal for an even 50e. 

#55 Focusrite Scarlett 2i2 (1st gen) teardown & modding

I had fiddled with one of these a couple years back, but here's another chance to take a look inside a (1st gen) Focusrite Scarlett 2i2, their second-smallest USB audio interface of the range.

#43 Focusrite Scarlett 18i6 teardown

As it turns out, i hadn't done (or at least documented) a teardown of this little guy, even though i've been using it for the last two years or so. Even though, as it turns out, i bought this a few months after starting this blog. Either way, i just put it up for sale (due to upgrading to the Scarlett 18i20 i inspected the other week). So i figured i might as well snap a few photos before it goes to its next owner (whomever that may be).

#41 Focusrite Scarlett 18i20 (1st gen) teardown & repair(?)

A local friend bought this slightly battle-scarred Focusrite Scarlett 18i20 off a buddy of his. The reported issue was some random / intermittent noise affecting only the inputs. Time will tell if that was conveyed to me accurately, or if it's a more global issue. First thing's first though - having a wee little look-see on the inside.

#38 Focusrite Scarlett 18i8 (1st gen) teardown

Yet another "sold as faulty" eBay catch - a nice little(?) Focusrite Scarlett 18i8 USB audio interface. Which turned out to actually have nothing at all wrong with it.

Admittedly, i went against the first commandment of teardowns (ie. "Don't turn it on; take it apaaaah't!.."), but only because it was the first troubleshooting step, and it used the same drivers as my Scarlett 18i6 "daily driver".

#35 Focusrite Saffire Pro 24 DSP teardown and repair

Yet another sold-as-faulty eBay catch - a nice little Focusrite Saffire Pro 24 DSP Firewire audio interface. The listing said:

"I bought this online and it is not working or it is not compatible with my computer. My computer is not recognising this audio interface. So I am selling it as not working."

 Fine by me. The photo of the back showed the Firewire port as looking quite pristine, so it wasn't a case of connector-inserted-upside-down. And for the price i won the auction for, it was worth the gamble. A frontal photo did show it powered up, so at the very least, it wasn't dead.