Search This Blog

Showing posts with label LED. Show all posts
Showing posts with label LED. Show all posts

Sunday 29 September 2019

#54 Recycled backlight LED strip ambient lighting

What with winter drawing closer, and the days (as in daylight) getting shorter up here in the north, one tends to need to turn on the lights more and earlier than in summertime. And since i'm the gathering type, i figured it's about time i put some previously collected materials to (good?) use.

Wednesday 7 February 2018

#26 Cheap & easy DIY LED light panels

Recycling's all the rage nowadays, right? Right..? Well, either way, freebie raw materials for projects are always welcome, that's something i'm pretty sure we can all agree on. Now, i'm not admitting to be a hoarder, far from it, but i kinda-sorta couldn't bring myself to throw away the dead (read: cracked) laptop LCDs that i had replaced for various clients at work. And what with "finally" expanding this blog onto YouTube, i figured i'd need some extra lighting for the workbench. Catching my drift yet?


Sunday 29 October 2017

#23 SM Pro Audio TB202 dual tube preamp / channel strip modding & upgrade, part 3

Even before having received the thing, i had already started thinking of daisy-chaining the two channels. In the context of something like a bass preamplifier, for example, one would want a "clean" channel, perhaps with some heavy compression, in order to have a consistent signal (especially in the lower registers), as well as a "dirty" channel, with a high-passed signal having some distortion applied to it.



Tuesday 24 October 2017

#22 SM Pro Audio TB202 dual tube preamp / channel strip modding & upgrade, part 2

Once the "adventures" from the previous post were completed, i proceeded to hook up one channel to my audio interface and feed some test-signals into it. This revealed a few things which didn't sit with me all that well.

First of all, the compressor didn't seem to be doing much of anything. No level reduction with the knob turned up to full (even with full input gain and clipping the snot out of the tube), the associated LED stayed green (instead of going red), nothing. A bit of oscilloscope-probing in the signal rectifier area quickly pointed out the issue - there was no real rectification going on. The signal coming out of that stage was still largely sinusoidal, albeit with a small kink at the zero-crossings. Well, that's no good...

Removing the diode in the signal-rectifier for testing didn't reveal anything, it measured as a normal 1N4148 both in and out of circuit. My aforementioned buddy pointed out that the arrangement they had used in this design, a "precision diode" circuit, was somewhat flawed as a concept, as is described in this link over here. I then proceeded to upgrade both channels to the "precision rectifier"circuit (see link above).

Saturday 21 October 2017

#20 SM Pro Audio TB202 power supply repair

<Some sort of continuation from another post>

Buuuuut that brings us to what might as well amount up to the proverbial "elephant in the room" - the power supply. No markings or label anywhere on it - if i didn't know any better, i could almost say it never had any (no adhesive residues or anything). Fortunately, it was held together with four Phillips-head self-tapping screws, so "disrobing" it wasn't unecessarily traumatic. That being said, what greeted my eyes, sort of WAS.


Monday 22 May 2017

#13 Fisher RS-1022 rehabilitation and bling-ification

So i had this old Fisher RS-1022 Studio Standard stereo receiver brought in, with one of the fuses in-line with the speaker outputs blown. Fair enough, that was easy enough to replace, they made it quite easy, with the fuseholders being mounted right on the rear panel. The clamps were nowhere near as elastic (or firm) as they might've once been, but with a pair of needle-nose pliers and a bit of creativity, that was no biggie.


Second issue, five of the six lamps that illuminate the tuning scale and the radio signal level were dead. In four of the dead ones, the fillament was attached only at one end, and in the fifth, it was attached at neither end. Interesting little lamps, 6.3v AC, 250mA, in a similar casing as 6x32mm glass fuses. Good luck finding replacement ones (which may very well just end up dying again anyway); these will get replaced with a few white LEDs recovered from a laptop display's backlight.

Sunday 30 April 2017

#7 Cheapo ring LED flash / light teardown & li-po mod

I had been thinking about grabbing a LED ring flash for my camera for quite some time, but finally last week, i pulled the trigger on one. Cheapest of the cheap (from what i could find on the British eBay), but still cost me a bit under 30 bucks.


That being said, it's a reasonably well-featured package: four different coloured diffusers (that go onto the front of the LED ring), eight different size adapter rings (for lens/filter threads, and onto which the light clamps on to), and the control unit that mounts into the camera flash "hot-shoe". Also, the LEDs in the light "head" are split into two halves (ie. left and right), for <ahem> creative effect when using the ring flash for macro work.

The thing normally works on 4 AA's, buuuuuut... given some of the previous posts here, you oughtta have half an idea about my feelings regarding disposable power sources... <wink-wink, nudge-nudge>