Search This Blog

Showing posts with label IEEE1394. Show all posts
Showing posts with label IEEE1394. Show all posts

Monday 25 May 2020

#61 MOTU 896 mk3 Hybrid teardown (post-recap)

Since relatively recently acquiring the MOTU 8M, once i got around to swapping it out for the 896 mk3 in my recording rack, i figured it might be worth doing a quick teardown of the latter, before i sell it off. I've done a really brief one over on the BadCaps.net forums when i first bought it, but it deserves some higher-res photos and a more detailed documentation of its guts. Do keep in mind that it got re-capped as soon as i got my hands on (or into?) it, so the electrolytics are not stock. But
without further ado...


Sunday 29 March 2020

#59 MOTU 828 mk2 teardown

Even though this is the 4th or 5th of these units that has gone through my hands, looks like i never documented a teardown of one - shame on me! Time to rectify that issue then, wouldn't you say? I grabbed this one off eBay for about 60 bucks or so, delivered. On one hand, because it was pretty dirt cheap at this money, and on the other hand, because it will be involved in a project idea i had a good few years ago. And yes, "as usual" (by now), this one had a busted Firewire connection, but for my own (nefarious?) purposes, i don't need that anyway.


Tuesday 24 March 2020

#58 Behringer FirePower FCA1616 teardown

Long time no see, eh? Well, what can you do when the new job's kicking you in the rear end? Regardless, new patient on the table this time around - A not-that-often-encountered Behringer audio interface (now discontinued, "obviously"). I took the gamble on it primarily because it was cheap, secondly because i wanted to take a peek under the hood, and somewhat connected to that, curious about if and what "magic mojo" might the touted Midas preamps contain.


Monday 4 November 2019

#56 Apogee Ensemble Firewire teardown

[[[ Repair can be found here ]]]

This came up on eBay the other week as faulty - inputs 1/2 and outputs 1/2 seemingly dead. First instinct was, 'obviously', look up photos online in the hope of finding some internal shots. A few minutes later, bingo: four CS4272's in there. Now, what're the odds one of them is handling the bad pair of ins & outs? Quite a bit higher than the analog input of one, and the analog output of another to be bad, wouldn't you say? But let's not get ahead of ourselves (too much), and take things one step at a time...



Thursday 11 April 2019

#39 M-Audio Profire 2626 teardown and repair

Ebay strikes again - this time, a pretty damn cheap (to acquire) M-Audio Profire 2626 Firewire audio interface. I maintain it's still the cheapest way, to this day, to get 24 inputs and outputs to and from a computer. Most other 1U (rackmount) interfaces will give you 8 mic preamps but only one bank of ADAT. The ones with two sets of ADAT I/O will cost you a pretty penny, though.


Either way, this was sold as "not detected by the computer", so my bet's on the Firewire chip being toast, "as usual". Can you see a pattern emerging here?

Wednesday 20 March 2019

#36 TC Electronic Digital Konnekt x32 teardown and repair

We're having a "productive" period, as it turns out. This time around a TC Electronic Digital Konnekt x32 audio interface / digital patchbay is on the chopping block. Or on the operating table, rather - i do indeed hope to repair, rather than dismember and mutilate this thing.


I managed to catch this, along with a twin of its, for under $200 / 200e delivered, as a "job lot", both sold as untested / faulty. The first one was shown powered up and possibly working fine (several LEDs on the front panel being lit), so potentially fine, pending tests. This second one though, not quite so much - only the blue LED halo surrounding the power button lit.


Friday 15 March 2019

#35 Focusrite Saffire Pro 24 DSP teardown and repair

Yet another sold-as-faulty eBay catch - a nice little Focusrite Saffire Pro 24 DSP Firewire audio interface. The listing said:
"I bought this online and it is not working or it is not compatible with my computer. My computer is not recognising this audio interface. So I am selling it as not working."
 Fine by me. The photo of the back showed the Firewire port as looking quite pristine, so it wasn't a case of connector-inserted-upside-down. And for the price i won the auction for, it was worth the gamble. A frontal photo did show it powered up, so at the very least, it wasn't dead.


Monday 10 December 2018

#34 MOTU Traveler mk3 teardown and repair


Hunting for faulty stuff on eBay has been fruitful yet again: this time, a MOTU Traveler mk3 Firewire audio interface. The reported issue was by now, the "classic", dead Firewire.


A pretty comprehensive little package, with loads of features shoehorned into quite a compact package - 1RU thickness / height, but only about 80% of the width.