#84 Cymatic LP-16 teardown & repair

So this Cymatic LP-16 16-channel backing track player came in the other week, from a loyal and "repeat" customer, with the description of "turns on but doesn't output any audio". Additionally, it had possibly been tested also with an AC(!!!) plug-pack. Either way, by the time it got into my hands, it was completely dead. 

#81 MOTU Traveler teardown & upgrade

As a follow-up to the recently posted MOTU Ultralite teardown, i had to grab this as soon as it popped up in my search results, because it had a price i couldn't ignore or refuse, and it had the ideal feature set for recording my band's jams and rehearsals. While the former had most of the features i needed in the 828mk2 i had been using, but in a smaller form factor, this Traveler packs more of the features i need (two extra mic preamps, while retaining the -10dBV/+4dBu line inputs with optional 6dB boost), in an intermediate form factor, as well as having a full 53dB of gain available on the mic preamps, but without weirdo custom potentiometers to wear out. Just about best of all worlds, really, especially for the paltry 85e this cost me. And as the cherry on top, it even has a separate battery input - hello, fully mobile recording sessions...

 

 

#80 MOTU Ultralite teardown

In an interesting turn of events, i actually did NOT get this one as faulty. It was more to relieve one of my 828mk2's from rehearsal-place-recording duty, and on the other hand, i managed to get it for quite cheap. In the context of, faulty ones had similar asking prices, so there's that.

#79 Focusrite Saffire 6 USB 2.0 repair

 Ok, this is gonna be a bit of a quickie. Basically, i got this one ridiculously cheap as well, with the intention of repairing it and gifting it to the new singer in my significant other's band, in order to facilitate more productive creative work. Just like the first one i did a teardown on and then modded, this was sold as faulty, but with more... obvious issues, let's call them.

#67 Audient iD22 part 2: the repair

 And now, getting back to the issue affecting this unit... As pointed out in the ad, the LT3439 apparently used to have a piddly little heatsink glued on top of it, but it got detached. Now, there's a chicken-and-egg type mystery here - did the heatsink glue fail because the chip overheated in the first place? Or did the chip get fried because the heatsink fell off? Regardless, investigation showed that one of the two switching transistors inside the chip seems to be stuck in a conducting state, despite the transistor itself not being shorted, though. But since it handles all the power for the analog circuitry, it's no shocker (no pun intended) that only the digital ins & outs work. 

#66 Audient iD22 teardown

Despite having hoped to nab an Audient interface for some time now, only quite recently did i manage to get my hands on one. Since i'm a cynical... [ahem] person, after having heard several notable(?) audio engineering channels over on Youtube ranting and raving about these, and the "Audient console preamps", and the "discrete JFET DI" and whatnot, my curiosity was indeed itching to see if and how the reality lives up to all the hype and marketing. 

#63 M-Audio M-Track 2x2M C-series teardown & repair

Boy, that's a lot of M's up there... But yeah, here's another eBay score, bought as faulty. Basically, because it was too cheap to pass up, even if it's unrepairable - a paltry 30eu. The ad said it will no longer power up, save for the phantom-power indicator LED, and won't be detected by a computer. But before troubleshooting, it warrants a thorough inspection, inside and out, wouldn't you say?

#61 MOTU 896 mk3 Hybrid teardown (post-recap)

Since relatively recently acquiring the MOTU 8M, once i got around to swapping it out for the 896 mk3 in my recording rack, i figured it might be worth doing a quick teardown of the latter, before i sell it off. I've done a really brief one over on the BadCaps.net forums when i first bought it, but it deserves some higher-res photos and a more detailed documentation of its guts. Do keep in mind that it got re-capped as soon as i got my hands on (or into?) it, so the electrolytics are not stock. But
without further ado...

#60 MOTU 8M teardown

Well, this one's a "biggie" - i had been lusting after one of these for a few years now, but the price was (and technically still is) on the prohibitive side, retailing at ~$1300-1500, depending where you look. Fortunately though, i've been stalking eBay off and on for one of these, and a used one happened to pop up just the other week, on auction. To my amazement and delight, despite there being at least 6 other "watchers", i was fortunate enough to win it for the opening bid, ie. about half the price of a new one.

#59 MOTU 828 mk2 teardown

Even though this is the 4th or 5th of these units that has gone through my hands, looks like i never documented a teardown of one - shame on me! Time to rectify that issue then, wouldn't you say? I grabbed this one off eBay for about 60 bucks or so, delivered. On one hand, because it was pretty dirt cheap at this money, and on the other hand, because it will be involved in a project idea i had a good few years ago. And yes, "as usual" (by now), this one had a busted Firewire connection, but for my own (nefarious?) purposes, i don't need that anyway.

#58 Behringer FirePower FCA1616 teardown

Long time no see, eh? Well, what can you do when the new job's kicking you in the rear end? Regardless, new patient on the table this time around - A not-that-often-encountered Behringer audio interface (now discontinued, "obviously"). I took the gamble on it primarily because it was cheap, secondly because i wanted to take a peek under the hood, and somewhat connected to that, curious about if and what "magic mojo" might the touted Midas preamps contain.

#57 Apogee Ensemble Firewire pt.2 - the repair

I was considering making the previous post about the repair as well, but once the teardown part of it was done, i decided it had gotten long enough already, so here's the testing and (hopefully) repair of it, separately.

#56 Apogee Ensemble Firewire teardown

[[[ Repair can be found here ]]]

This came up on eBay the other week as faulty - inputs 1/2 and outputs 1/2 seemingly dead. First instinct was, 'obviously', look up photos online in the hope of finding some internal shots. A few minutes later, bingo: four CS4272's in there. Now, what're the odds one of them is handling the bad pair of ins & outs? Quite a bit higher than the analog input of one, and the analog output of another to be bad, wouldn't you say? But let's not get ahead of ourselves (too much), and take things one step at a time...

#55 Focusrite Scarlett 2i2 (1st gen) teardown & modding

I had fiddled with one of these a couple years back, but here's another chance to take a look inside a (1st gen) Focusrite Scarlett 2i2, their second-smallest USB audio interface of the range.

#43 Focusrite Scarlett 18i6 teardown

As it turns out, i hadn't done (or at least documented) a teardown of this little guy, even though i've been using it for the last two years or so. Even though, as it turns out, i bought this a few months after starting this blog. Either way, i just put it up for sale (due to upgrading to the Scarlett 18i20 i inspected the other week). So i figured i might as well snap a few photos before it goes to its next owner (whomever that may be).

#42 Presonus Audiobox 1818VSL - revisited and revived!

[Part one can be found right over here]

Through a mix of patience, persistence and good luck, i managed to get my grubby mits on another, fully functional Audiobox 1818VSL, for considerably less than the 1-2 pricey ones available on eBay in Europe.

#41 Focusrite Scarlett 18i20 (1st gen) teardown & repair(?)

A local friend bought this slightly battle-scarred Focusrite Scarlett 18i20 off a buddy of his. The reported issue was some random / intermittent noise affecting only the inputs. Time will tell if that was conveyed to me accurately, or if it's a more global issue. First thing's first though - having a wee little look-see on the inside.

#39 M-Audio Profire 2626 teardown and repair

Ebay strikes again - this time, a pretty damn cheap (to acquire) M-Audio Profire 2626 Firewire audio interface. I maintain it's still the cheapest way, to this day, to get 24 inputs and outputs to and from a computer. Most other 1U (rackmount) interfaces will give you 8 mic preamps but only one bank of ADAT. The ones with two sets of ADAT I/O will cost you a pretty penny, though.

Either way, this was sold as "not detected by the computer", so my bet's on the Firewire chip being toast, "as usual". Can you see a pattern emerging here?

#38 Focusrite Scarlett 18i8 (1st gen) teardown

Yet another "sold as faulty" eBay catch - a nice little(?) Focusrite Scarlett 18i8 USB audio interface. Which turned out to actually have nothing at all wrong with it.

Admittedly, i went against the first commandment of teardowns (ie. "Don't turn it on; take it apaaaah't!.."), but only because it was the first troubleshooting step, and it used the same drivers as my Scarlett 18i6 "daily driver".

#37 Presonus Audiobox 1818VSL teardown and troubleshooting (part 1)

Together with the pair of Konnekt x32's (one of which is dealt with in the previous write-up here), i also got one of these Presonus Audiobox 1818VSL's. Also sold as untested, but powered up and allegedly detected by a Mac, so i figured it couldn't have been too far gone (or fubar'd).

The reality of it turned out to be a wee bit more complicated than one might've hoped...