#84 Cymatic LP-16 teardown & repair

So this Cymatic LP-16 16-channel backing track player came in the other week, from a loyal and "repeat" customer, with the description of "turns on but doesn't output any audio". Additionally, it had possibly been tested also with an AC(!!!) plug-pack. Either way, by the time it got into my hands, it was completely dead. 

#83 Focusrite Scarlett 18i8 gen2 teardown & repair

I know it's been quite a while, but i haven't given this up! Life just gets in the way, i'm sure you know how it is... Regardless, this time we'll be taking a dive into yet another "as faulty" acquisition - an utterly pristine-looking Focusrite Scarlett 18i8 gen2.

#79 Focusrite Saffire 6 USB 2.0 repair

 Ok, this is gonna be a bit of a quickie. Basically, i got this one ridiculously cheap as well, with the intention of repairing it and gifting it to the new singer in my significant other's band, in order to facilitate more productive creative work. Just like the first one i did a teardown on and then modded, this was sold as faulty, but with more... obvious issues, let's call them.

#76 Fractal Audio Axe-FX II teardown and repair

A couple weeks back, an acquaintance contacted me about his Axe-FX II suddenly not powering up anymore. I saw this as an opportunity to at the very least take a peek under the hood of one of these things (still selling for four-figure amounts), so why not?

I had neglected to snap photos of the outside of the thing (because other priorities), so you'll have to settle for some "stock" shots. Not that there's anything overly interesting to see anyway.

#75 Focusrite Scarlett 2i4 (1st gen) teardown & repair

Perhaps a bit anachronistically, only *after* getting my hands on the previously-torn-down 2i4 gen2, i also came into the possession of a 2i4 gen1, that was no longer being detected completely / correctly by the computer. But hey, better late than never, right? I also grabbed a working one (because the price was near-irresistible), to have a known-good source for the firmware, in case that was the issue.

#71 Shure 55SH Series II "Elvis mic" teardown & repair

The practical side of this one was performed and documented a couple months back, but since i've had this back-log to work through, the text is only getting written now. But good things come to those who wait, right? Or so i've heard...

Regardless, i couldn't not grab this deal when i saw it. A shure 55SH "Elvis mic", with allegedly low(ered) output, for 75eu shipped (considering it retails around 160-ish). Now, granted, i HAD peeked around the interwebs beforehand, and it seemed that, at least in some cases, the on/off switch could be a suspect. But on the other hand, even IF the capsule itself turned out to be a dud, i could still MacGyver another capsule in there, one way or another (possibly from a Grundig GDSM-202, but shhhhh!...). Aesthetically it was in good shape, so why not?

#69 Focusrite Scarlett 2i4 (2nd gen) teardown & repair

For a little while now, i've been thinking of "upgrading" from my old-but-modded M-Audio Fast Track to use as an in-ear monitor amplifier, and the Scarlett 2i4 caught my eye. The mono/stereo direct-monitor selection, as well as the hardware-switchable pads on the inputs made up just the right feature set, in addition to it being usable as a mobile recording interface. As it happens, just the other week, mere days after having saved an eBay search for 2i4's, an email notification revealed a 2nd gen allegedly-faulty unit being up for sale from Italy. I quickly asked the seller about shipping costs, and ended up sealing the deal for an even 50e. 

#68 Alesis M1 Active Mk2 rehabilitation, part one

Over on the Badcaps.net forums, a thread was started all the way back in 2010, about power supply issues in these arguably "classic" low-cost active studio monitors. It even ended up being stickied just this winter, so it's been quite active and useful. It served as motivation for myself, to take up hunting for faulty ones - not sure if i had gone through three pairs, but at least two pairs i revived and sold off to a couple friends, some 7-8 years ago, and to this day i've yet to hear back about any further issues, so i take that as a good sign. In the mean time, i still contributed with thoughts and advice there, which helped lead to several successes.

Recently, a fellow forum member there got fed up with his failed attempts to revive his pair of monitors, and got himself a pair of new ones. In that context, we struck a deal for the Alesis'es, and a few weeks later, here they are.

#67 Audient iD22 part 2: the repair

 And now, getting back to the issue affecting this unit... As pointed out in the ad, the LT3439 apparently used to have a piddly little heatsink glued on top of it, but it got detached. Now, there's a chicken-and-egg type mystery here - did the heatsink glue fail because the chip overheated in the first place? Or did the chip get fried because the heatsink fell off? Regardless, investigation showed that one of the two switching transistors inside the chip seems to be stuck in a conducting state, despite the transistor itself not being shorted, though. But since it handles all the power for the analog circuitry, it's no shocker (no pun intended) that only the digital ins & outs work. 

#57 Apogee Ensemble Firewire pt.2 - the repair

I was considering making the previous post about the repair as well, but once the teardown part of it was done, i decided it had gotten long enough already, so here's the testing and (hopefully) repair of it, separately.

#50 Philips HTS7201 Soundhub Home Theater (2.1) teardown & repair

This just came in, with the symptom description of "will no longer turn on". Fair enough, sounds like a power supply issue then. Apparently this retailed around $400-ish when new (according to a 2012 review i found online) - not exactly bottom-of-the-barrel, but it's still very much in the mainstream/consumer range, so i'm expecting crap caps to be the root cause. But time will tell.

#49 Joyo ZoMBie, part two - analysis and repair

It took the best part of an evening and a couple hours the next day, but i managed to lift the schematic for the whole preamp board. I also recreated the board, but that was mostly for sanity-checking. I used all the same component designators, but didn't bother measuring all the dozens of small ceramic caps, because there's only SO far i'm willing to go...

#46 Tivoli Henry Kloss Model One teardown & repair

A client brought in this Tivoli Model One the other day, with symptoms of (lots of) noise. Once again, i went against the mantra of "don't turn it on; take it apaaaah't", but this time, for good reason - the thing isn't mine.

#44 Ram Audio S6000 teardown & repair (rebranded as LD Systems SP 6K)

A good buddy and neighbour of mine had one of his amps kick the bucket in the middle of a gig (one i was helping out on, as well). On the bright side, noone noticed, only when turning-off time came. The beast in question was one of his two LD Systems SP 6K amps (rebadged Ram Audio S6000).

#42 Presonus Audiobox 1818VSL - revisited and revived!

[Part one can be found right over here]

Through a mix of patience, persistence and good luck, i managed to get my grubby mits on another, fully functional Audiobox 1818VSL, for considerably less than the 1-2 pricey ones available on eBay in Europe.

#39 M-Audio Profire 2626 teardown and repair

Ebay strikes again - this time, a pretty damn cheap (to acquire) M-Audio Profire 2626 Firewire audio interface. I maintain it's still the cheapest way, to this day, to get 24 inputs and outputs to and from a computer. Most other 1U (rackmount) interfaces will give you 8 mic preamps but only one bank of ADAT. The ones with two sets of ADAT I/O will cost you a pretty penny, though.

Either way, this was sold as "not detected by the computer", so my bet's on the Firewire chip being toast, "as usual". Can you see a pattern emerging here?

#37 Presonus Audiobox 1818VSL teardown and troubleshooting (part 1)

Together with the pair of Konnekt x32's (one of which is dealt with in the previous write-up here), i also got one of these Presonus Audiobox 1818VSL's. Also sold as untested, but powered up and allegedly detected by a Mac, so i figured it couldn't have been too far gone (or fubar'd).

The reality of it turned out to be a wee bit more complicated than one might've hoped...

#36 TC Electronic Digital Konnekt x32 teardown and repair

We're having a "productive" period, as it turns out. This time around a TC Electronic Digital Konnekt x32 audio interface / digital patchbay is on the chopping block. Or on the operating table, rather - i do indeed hope to repair, rather than dismember and mutilate this thing.

I managed to catch this, along with a twin of its, for under $200 / 200e delivered, as a "job lot", both sold as untested / faulty. The first one was shown powered up and possibly working fine (several LEDs on the front panel being lit), so potentially fine, pending tests. This second one though, not quite so much - only the blue LED halo surrounding the power button lit.

#35 Focusrite Saffire Pro 24 DSP teardown and repair

Yet another sold-as-faulty eBay catch - a nice little Focusrite Saffire Pro 24 DSP Firewire audio interface. The listing said:

"I bought this online and it is not working or it is not compatible with my computer. My computer is not recognising this audio interface. So I am selling it as not working."

 Fine by me. The photo of the back showed the Firewire port as looking quite pristine, so it wasn't a case of connector-inserted-upside-down. And for the price i won the auction for, it was worth the gamble. A frontal photo did show it powered up, so at the very least, it wasn't dead.

#32 M-Audio (Avid) Fast Track C600 teardown & repair

This little bugger, an M-Audio / Avid Fast Track C600, was listed as faulty on eBay - description said it would no longer power up, regardless of it being bus-powered or having its own external power supply connected. Got it shipped for 30eu / $30, so why not?