#24 SM Pro Audio TB202 dual tube preamp / channel strip modding & upgrade, part 4

On the note of front panel switches, you might've noticed two extra ones, in the previous post (the part 3). One other idea had crossed my mind, already long before this second stage of modding. It took me a little while, but i managed to get my head around how to implement this. The idea was to be able to swap the order of the two processors in the signal path.

From the factory, as described in the "part one" post, the processing order is input - gain - tube - compressor - EQ - output. But in some cases, it can be desirable to have the EQ come before the compression stage. That way, one can attenuate certain frequency ranges that one would not want the compressor to react to (or conversely, boost ranges for the compressor to react to).

#21 SM Pro Audio TB202 dual tube preamp / channel strip modding & upgrade

<Further developments can be found in parts two, three and four>

I'll admit, this was a bit of a lucky catch, in that it was mistakenly listed in the wrong eBay category, but one i "stalk" for good deals on certain faulty bits of audio gear. It was up for auction, there didn't seem to be much demand for it, and i ended up winning it for a mere 21 euros. About as much as the shipping for it ended up costing, oddly enough.

But still, even for some 40-odd bucks, not a bad little unit. Two channels, a (bare-bones-ish) compressor on each (1.5-10:1 ratio, 1ms/5ms attack, 500ms/1500ms release, at least according to the specs in the manual), as well as 3-band EQ (80Hz shelving / 1.8kHz bell / 8kHz shelving), and there's a tube / valve involved in the circuitry as well. If nothing else, i figured it would do nicely as a bass DI (or even an overdriven preamp, once some internal re-wiring is figured out and done).