Aaaaand it's back! Not because of technical issues though. Due to chance, and the limited speed of international shipping, only the day after the owner got his guitar back, did the Fishman rechargeable battery-pack get delivered, just only too late to include it in the previous operation. But no matter, this should be far less involved than that.
Electronics - Audio - Teardowns - Mods - Repairs - Projects - Music - Rants - Shenanigans
Search This Blog
Showing posts with label jack. Show all posts
Showing posts with label jack. Show all posts
Saturday, 14 September 2019
#52 Solar A2.7 & Fishman Fluence Keith Merrow, part two
Wednesday, 11 September 2019
#51 Solar A2.7 & Fishman Fluence Keith Merrow & 5-way install
Local guitarist buddy time again (owner of the Fortin Grind and the Warwick bass amp featured here previously) - after taking several swings at it, he got fed up and let me have a go at installing a brand new set of Fishman Fluence Keith Merrow pickups into his Solar A2.7 guitar. Complete with some custom switching and whatnot, to take full advantage of the entire feature set the pickups offer.
Saturday, 12 May 2018
#28 Active full-range surround speaker project (BN96-12832 & TPA3118)
Since the "unofficial" theme of this blog seems to be repair, recycling and repurposing (more or less), i finally got around to getting knee-deep into this idea, which i started devising quite a while ago - a pair of "slimline" surround speakers.
Disclaimers:
- No, these are not meant (or supposed) to be "hi-fi". More just for a bit of "ambient noise", if you will, for movies with 5.1 soundtracks. That, and possibly alternative monitoring for checking mixes.
- No, these are not meant to go terribly loud. Due to, let's call them, physical constraints, they'll be placed at the corners of my sofa (right up against the wall, opposite the TV and the "mains"), so no huge SPL's are required.
Disclaimers:
- No, these are not meant (or supposed) to be "hi-fi". More just for a bit of "ambient noise", if you will, for movies with 5.1 soundtracks. That, and possibly alternative monitoring for checking mixes.
- No, these are not meant to go terribly loud. Due to, let's call them, physical constraints, they'll be placed at the corners of my sofa (right up against the wall, opposite the TV and the "mains"), so no huge SPL's are required.
Wednesday, 21 June 2017
#15 Alesis io|26 repair & modding
So, i got my hands on one of these Alesis io|26 interfaces for pretty cheap (50 bucks delivered). "Of course", i bought it as faulty (can you see a pattern yet?), with the already "classic" issue of dead Firewire chip (the ubiquitous Texas Instruments TSB41AB2).
I went for it mainly for two reasons. First, because i knew it was based on the TC Applied Technologies Dice II chip, and as such, should have flexible enough mixing / routing options; second, due to the ADAT inputs available. The sort of "added bonus", one might say, were the gain adjustments for the 8 analog (mic/line) inputs.
I went for it mainly for two reasons. First, because i knew it was based on the TC Applied Technologies Dice II chip, and as such, should have flexible enough mixing / routing options; second, due to the ADAT inputs available. The sort of "added bonus", one might say, were the gain adjustments for the 8 analog (mic/line) inputs.
Labels:
Alesis,
audio,
Cirrus Logic,
Dice II,
flyback,
headphone,
interface,
jack,
Konnekt,
modding,
Nichicon,
repair,
TC Electronic,
teardown,
Texas Instruments,
TI,
TSB41AB2
Wednesday, 19 April 2017
#4 Dunlop Zakk Wylde ZW45 wah pedal teardown & repair
Ok, this one's a real quickie. One of the guitarists in my band got this wah (Dunlop ZW45 Zakk Wylde Cry Baby Wah) as a gift a number of years ago, and in the last few weeks it developed crackly and intermittent sound (regardless of being on or off).
Initial fiddling with the power / input / output jacks pointed towards a questionable patch-cable, but even that soon stopped working, which then turned my suspicions towards cracked solder joints (rather than the jack sockets themselves).
Initial fiddling with the power / input / output jacks pointed towards a questionable patch-cable, but even that soon stopped working, which then turned my suspicions towards cracked solder joints (rather than the jack sockets themselves).
Subscribe to:
Posts (Atom)