#48 JBL Charge 3 Bluetooth speaker teardown

This JBL Charge 3 came in last week in need of a micro-USB (charging) connector replacement. First thing i did was to look up how to take apart the thing, and the good people at iFixit had a comprehensible enough guide.

The connector board is totally separate from the mainboard, so the "repair" part was trivial, and done within minutes. But the more interesting stuff lies deeper inside. Sure, my photography may never get to be quite as pretty as iFixit's, but on the other hand, you're not here (just) for pretty pictures, are you? You're here to see what makes things tick. Or at least that's the curiosity that drives me to take apart stuff like this.

#47 Joyo ZoMBie guitar amplifier teardown

My bandmate got his hands on this Joyo ZoMBie about a week or two back; it was sold as faulty. No idea how or why, but there's something dicky with the tone control - on some power-ups it works fine, but sometimes quits working (ie. sounds like the setting got stuck at some random point along the travel of the knob), no matter how much you twist it. Power cycling sometimes helps, but inconsistently, and even if it does, it just "gives up" again, sooner or later.

#46 Tivoli Henry Kloss Model One teardown & repair

A client brought in this Tivoli Model One the other day, with symptoms of (lots of) noise. Once again, i went against the mantra of "don't turn it on; take it apaaaah't", but this time, for good reason - the thing isn't mine.

#45 Pedal pandemonium, part one - Fortin Grind

A local guitarist friend of mine recently upgraded his rig to a Fractal AX8, and as such, a couple of his overdrive pedals got relegated to (mostly) sitting on a shelf. Knowing some of my interests, he offered to lend them to me, to have a look on the inside, out of sheer curiosity.

First on the chopping block (as it were), a Fortin Grind. 

#43 Focusrite Scarlett 18i6 teardown

As it turns out, i hadn't done (or at least documented) a teardown of this little guy, even though i've been using it for the last two years or so. Even though, as it turns out, i bought this a few months after starting this blog. Either way, i just put it up for sale (due to upgrading to the Scarlett 18i20 i inspected the other week). So i figured i might as well snap a few photos before it goes to its next owner (whomever that may be).

#41 Focusrite Scarlett 18i20 (1st gen) teardown & repair(?)

A local friend bought this slightly battle-scarred Focusrite Scarlett 18i20 off a buddy of his. The reported issue was some random / intermittent noise affecting only the inputs. Time will tell if that was conveyed to me accurately, or if it's a more global issue. First thing's first though - having a wee little look-see on the inside.

#39 M-Audio Profire 2626 teardown and repair

Ebay strikes again - this time, a pretty damn cheap (to acquire) M-Audio Profire 2626 Firewire audio interface. I maintain it's still the cheapest way, to this day, to get 24 inputs and outputs to and from a computer. Most other 1U (rackmount) interfaces will give you 8 mic preamps but only one bank of ADAT. The ones with two sets of ADAT I/O will cost you a pretty penny, though.

Either way, this was sold as "not detected by the computer", so my bet's on the Firewire chip being toast, "as usual". Can you see a pattern emerging here?

#38 Focusrite Scarlett 18i8 (1st gen) teardown

Yet another "sold as faulty" eBay catch - a nice little(?) Focusrite Scarlett 18i8 USB audio interface. Which turned out to actually have nothing at all wrong with it.

Admittedly, i went against the first commandment of teardowns (ie. "Don't turn it on; take it apaaaah't!.."), but only because it was the first troubleshooting step, and it used the same drivers as my Scarlett 18i6 "daily driver".

#37 Presonus Audiobox 1818VSL teardown and troubleshooting (part 1)

Together with the pair of Konnekt x32's (one of which is dealt with in the previous write-up here), i also got one of these Presonus Audiobox 1818VSL's. Also sold as untested, but powered up and allegedly detected by a Mac, so i figured it couldn't have been too far gone (or fubar'd).

The reality of it turned out to be a wee bit more complicated than one might've hoped...

#36 TC Electronic Digital Konnekt x32 teardown and repair

We're having a "productive" period, as it turns out. This time around a TC Electronic Digital Konnekt x32 audio interface / digital patchbay is on the chopping block. Or on the operating table, rather - i do indeed hope to repair, rather than dismember and mutilate this thing.

I managed to catch this, along with a twin of its, for under $200 / 200e delivered, as a "job lot", both sold as untested / faulty. The first one was shown powered up and possibly working fine (several LEDs on the front panel being lit), so potentially fine, pending tests. This second one though, not quite so much - only the blue LED halo surrounding the power button lit.

#35 Focusrite Saffire Pro 24 DSP teardown and repair

Yet another sold-as-faulty eBay catch - a nice little Focusrite Saffire Pro 24 DSP Firewire audio interface. The listing said:

"I bought this online and it is not working or it is not compatible with my computer. My computer is not recognising this audio interface. So I am selling it as not working."

 Fine by me. The photo of the back showed the Firewire port as looking quite pristine, so it wasn't a case of connector-inserted-upside-down. And for the price i won the auction for, it was worth the gamble. A frontal photo did show it powered up, so at the very least, it wasn't dead.

#34 MOTU Traveler mk3 teardown and repair

Hunting for faulty stuff on eBay has been fruitful yet again: this time, a MOTU Traveler mk3 Firewire audio interface. The reported issue was by now, the "classic", dead Firewire.

A pretty comprehensive little package, with loads of features shoehorned into quite a compact package - 1RU thickness / height, but only about 80% of the width.

#32 M-Audio (Avid) Fast Track C600 teardown & repair

This little bugger, an M-Audio / Avid Fast Track C600, was listed as faulty on eBay - description said it would no longer power up, regardless of it being bus-powered or having its own external power supply connected. Got it shipped for 30eu / $30, so why not?

#30 Double Dock Day - HP HSTNN-I11X and Dell PR03X (USB 3.0) teardown

Right, so i had been on the lookout for a cheap docking station for my Dell Precision M4800 for a while, and the other week i stumbled across and ad on a local website about a clearance sale from a university - docking stations, laptop chargers, some desktops etc. When i finally got to their premises, instead of the $5-10 prices i expected, the guy there said i could have them for some coffee-change into the tip-jar, so i walked out with two PR03X's for a mere 40-50 cents or so - me happy!

The HP dock though, was about 15$, but came with a ma-HOO-sive 230W power brick, which is for another project; expect a teardown of the brick soon. Sadly the dock wouldn't fit my HP Elitebook 6930p (only the later xx40 Elitebooks), but that doesn't mean we can't take a peek under the skirts, and then resell it to make some of the money back, right?

#28 Active full-range surround speaker project (BN96-12832 & TPA3118)

Since the "unofficial" theme of this blog seems to be repair, recycling and repurposing (more or less), i finally got around to getting knee-deep into this idea, which i started devising quite a while ago - a pair of "slimline" surround speakers.

Disclaimers:
 - No, these are not meant (or supposed) to be "hi-fi". More just for a bit of "ambient noise", if you will, for movies with 5.1 soundtracks. That, and possibly alternative monitoring for checking mixes.
 - No, these are not meant to go terribly loud. Due to, let's call them, physical constraints, they'll be placed at the corners of my sofa (right up against the wall, opposite the TV and the "mains"), so no huge SPL's are required.

#15 Alesis io|26 repair & modding

So, i got my hands on one of these Alesis io|26 interfaces for pretty cheap (50 bucks delivered). "Of course", i bought it as faulty (can you see a pattern yet?), with the already "classic" issue of dead Firewire chip (the ubiquitous Texas Instruments TSB41AB2).

I went for it mainly for two reasons. First, because i knew it was based on the TC Applied Technologies Dice II chip, and as such, should have flexible enough mixing / routing options; second, due to the ADAT inputs available. The sort of "added bonus", one might say, were the gain adjustments for the 8 analog (mic/line) inputs.