#61 MOTU 896 mk3 Hybrid teardown (post-recap)

Since relatively recently acquiring the MOTU 8M, once i got around to swapping it out for the 896 mk3 in my recording rack, i figured it might be worth doing a quick teardown of the latter, before i sell it off. I've done a really brief one over on the BadCaps.net forums when i first bought it, but it deserves some higher-res photos and a more detailed documentation of its guts. Do keep in mind that it got re-capped as soon as i got my hands on (or into?) it, so the electrolytics are not stock. But
without further ado...

#60 MOTU 8M teardown

Well, this one's a "biggie" - i had been lusting after one of these for a few years now, but the price was (and technically still is) on the prohibitive side, retailing at ~$1300-1500, depending where you look. Fortunately though, i've been stalking eBay off and on for one of these, and a used one happened to pop up just the other week, on auction. To my amazement and delight, despite there being at least 6 other "watchers", i was fortunate enough to win it for the opening bid, ie. about half the price of a new one.

#59 MOTU 828 mk2 teardown

Even though this is the 4th or 5th of these units that has gone through my hands, looks like i never documented a teardown of one - shame on me! Time to rectify that issue then, wouldn't you say? I grabbed this one off eBay for about 60 bucks or so, delivered. On one hand, because it was pretty dirt cheap at this money, and on the other hand, because it will be involved in a project idea i had a good few years ago. And yes, "as usual" (by now), this one had a busted Firewire connection, but for my own (nefarious?) purposes, i don't need that anyway.

#58 Behringer FirePower FCA1616 teardown

Long time no see, eh? Well, what can you do when the new job's kicking you in the rear end? Regardless, new patient on the table this time around - A not-that-often-encountered Behringer audio interface (now discontinued, "obviously"). I took the gamble on it primarily because it was cheap, secondly because i wanted to take a peek under the hood, and somewhat connected to that, curious about if and what "magic mojo" might the touted Midas preamps contain.

#57 Apogee Ensemble Firewire pt.2 - the repair

I was considering making the previous post about the repair as well, but once the teardown part of it was done, i decided it had gotten long enough already, so here's the testing and (hopefully) repair of it, separately.

#56 Apogee Ensemble Firewire teardown

[[[ Repair can be found here ]]]

This came up on eBay the other week as faulty - inputs 1/2 and outputs 1/2 seemingly dead. First instinct was, 'obviously', look up photos online in the hope of finding some internal shots. A few minutes later, bingo: four CS4272's in there. Now, what're the odds one of them is handling the bad pair of ins & outs? Quite a bit higher than the analog input of one, and the analog output of another to be bad, wouldn't you say? But let's not get ahead of ourselves (too much), and take things one step at a time...

#55 Focusrite Scarlett 2i2 (1st gen) teardown & modding

I had fiddled with one of these a couple years back, but here's another chance to take a look inside a (1st gen) Focusrite Scarlett 2i2, their second-smallest USB audio interface of the range.

#54 Recycled backlight LED strip ambient lighting

What with winter drawing closer, and the days (as in daylight) getting shorter up here in the north, one tends to need to turn on the lights more and earlier than in summertime. And since i'm the gathering type, i figured it's about time i put some previously collected materials to (good?) use.

#53 JMicron JM20330-based mSATA to ZIF-ATA adapter power modding

A few years ago, in the quest for more storage space, power saving, weight reduction and eliminating sensitivity to shock, i decided to upgrade my old iPod Video (5.5G) from the stock 80GB hard-drive to a 256GB SSD, with the aid of an mSATA to ZIF-ATA adapter, and some mods to the "aftermarket" Rockbox firmware.

... Except that recently, for whatever reason, it's been kinda flaky, and ended up giving up altogether. To aid with stability, i had also performed some hardware mods on the power supply side of things (as well as on the iPod's mainboard). The rationale behind that, at least in part, was the source of the above-mentioned mods, so i'll need to transplant those to this newer one as well.

#52 Solar A2.7 & Fishman Fluence Keith Merrow, part two

Aaaaand it's back! Not because of technical issues though. Due to chance, and the limited speed of international shipping, only the day after the owner got his guitar back, did the Fishman rechargeable battery-pack get delivered, just only too late to include it in the previous operation. But no matter, this should be far less involved than that.